No 3D preview available
Refresh the page if the 3D view does not work
A more compact display relocation mod for the Ender 3 pro.
Suggested Price: €3.00
You can enter any value in the price field to make a donation. Don’t want to donate? Simply enter an amount of 0
Suggested Price: €3.00
Disclaimer: No rights can be derived from the use of the designs or information on this website. Use of these designs is at your own risk at all times. Schone Engineering and Proper printing do not accept liability for any damage resulting from the use of the designs.
Printer: Creality Ender 3 pro
Rafts: No
Supports: No
Resolution: 0.2
Infill: 30%
Filament: Nylon CF
Notes:
I have used Nylon with carbon fiber because of the aesthetics, but PLA, PETG, ABS etc. should work as well.
If you use the version without inserts, I recommend tapping the M3 thread. The wall is very thin and you should probably use pliers to prevent cleaving. I haven’t tried this and please let me know if you experience any issues.
Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International licence.
Proper Printing 2020 by Schone Engineering
andre –
This is a very, very good stl! It really helps to reduce the space occupied by the 3d printer
dnasir (verified owner) –
This is a really neat mod. However, I’d like to suggest that you deboss the logo instead so that the faceplate can be printed flat.
girdwood24@gmail.com (verified owner) –
Another great design, I remixed this design to fit on my ender 3 pro as my frame has been modified, which did not allow me to use as it was, it’s a great new position for the lcd, and the angle is so much nicer, good job and thanks once again
Ticktok (verified owner) –
Really like the design and how it slims my printer profile down. Only problem was the block on the left side of the display faceplate made my display not fit, and I didn’t realize till after, so rather than reprint I just chopped it off with a dremel. Also wish there had been a version that didn’t have your logo on it, but it was easy enough to chop off and throw mine on so my printer is customized to me, and I took the opportunity to do a filament change to make the debossed logo pop. Next up, the power supply mount.
Pictures:
https://i.imgur.com/OuOTAv6.jpg
https://i.imgur.com/zuGvdtq.jpg
Toby (verified owner) –
Would love to use this design on my regular ender 3. Any chance you’ll make a regular Ender 3 version?
Antti (verified owner) –
Very nice location for the screen. Wish there was a little more sturdier version. Printed this with pretty strong settings out of PLA and this still wobbles too much when touching the wheel.