Filament dryer

Suggested Price: 3.00

You can enter any value in the price field to make a donation. Don’t want to donate? Simply enter an amount of 0

Suggested Price: 3.00

Disclaimer: No rights can be derived from the use of the designs or information on this website. Use of these designs is at your own risk at all times. Schone Engineering and Proper printing do not accept liability for any damage resulting from the use of the designs.


This is my version of a food dryer changed into a filament dryer. The dryer I’ve used is this one: from Neu haus. I just have found the same one here which I just found out is a lot cheaper 😛

Be aware that the temperature inside the dryer can reach 70°C so PLA and PETG are not suitable for this. I’ve used ABS for this one and Nylon for another dryer which are both sufficient.

I have used a bearing to make a rotating base which decreases the stress on the extruder gear. I have made a YouTube video in which I show how I prepare this dryer. It’s a bit experimental, but it worked!

Print Settings

Printer: Creality CR-10
Rafts: Yes
Supports: No
Resolution: 0.2
Infill: 30%
Filament: ABS


Do not use PLA or PETG because of the high temperatures.

Parts needed

For the filament output you need:

  • 1× a regular bowden coupler which is screwed in
  • 2× m3×10 hexagon bolts
  • 2× m3 (spring) washers
  • 2× m3 nuts
  • bowden tubing


There are no reviews yet.

Be the first to review “Filament dryer”

Your email address will not be published. Required fields are marked *