Pen holder with swappable system
Suggested price: €3.00
Summary
I have designed a pen holder to turn my printer into a drawing machine which fits the Swappable hot end. Unlike most pen holders I have seen, this one is activated using a 12V solenoid. This way it is possible to control it quite similar to controlling a laser cutter. The solenoid is, like the laser cutter, controlled by the part end fan connection. This worked as well as I could have hoped for!
Print Settings
Printer: Creality CR-10
Rafts: No
Supports: Doesn’t matter
Resolution: 0.2
Infill: 20%
Filament: PETG
Parts needed
- 12V solenoid, I’ve used this one: https://www.reichelt.de/hubmagnet-monostabil-8-mm-7-7-n-4-2-w-tds-10a-8-0-12v-p236435.html?r=1
- Mini v-slot idler pulley kit https://reprapworld.com/products/mechanical/pulleys/v_slot_idler_pulley_kit_mini/?search/
- 4× M3×8mm countersunk screws
- 2× M3×20mm screws for clamping the pen (length of the screws depends on the thickness of the pen)
- 1× M3×20 screw for adjusting the stroke
- At least 1 m5 washer for the adjustable v-slot pulley
- 2× m3 nut for the version with inserts, otherwise 4×
- 1× m3 wing nut. A regular nut will do too
- 4× m3 brass inserts for the insert version
Please let me know if I have forgotten something 🙂
You must be logged in to post a review.
Reviews
There are no reviews yet.