Headphones holder
Category: 3D print files , Generic designs
I designed a simple headphone holder that can be mounted to a vertical flat surface using double sided tape. I mounted this on the back of my monitor so it’s out of sight and makes my workspace look cleaner.
€2.48
| I am currently working on a different way of offering my designs where individual STL and STEP files can be purchased. I also offer these files on Patreon, Printables and Thangs with the option for monthly subscriptions. |
| I am currently working on a different way of offering my designs where individual STL and STEP files can be purchased. I also offer these files on Patreon, Printables and Thangs with the option for monthly subscriptions. |
I designed a simple headphone holder that can be mounted to a vertical flat surface using double sided tape. I recommend using strong double sided tape and I have good experiences with 3M VHB tape*. I mounted this on the back of my monitor so it’s out of sight and makes my workspace look cleaner.
*This is an affiliate link which I earn commission from.
Printer: Any decent FDM printer
Brim: No
Supports: No
Nozzle diameter: 0.4 mm
Layer height: 0.15 mm – 0.2 mm
Infill: 20%
Filament: Regular PLA or PETG
Notes:
None, it’s an easy print.
Double sided tape. I have good experiences with <a href=”https://geni.us/cS5Pe” target=”_blank” rel=”noopener”>3M VHB tape</a>*. Make sure that you use a suitable adhesive for both the print and surface you are going to mount this to.
*This is an affiliate link which I earn commission from.
Apply adhesive on the back side (flat side) of the print and stick it to the right position.
